Use and maintenance of Peas polisher prices china


Time of issue:

2021-09-15

1. Before the start-up of Peas polisher prices china, especially after assembly. First remove the foreign matters on the Peas polisher prices china, turn the pulley by hand without abnormal sound and foreign matter feeling then can be start.

1. Before the start-up of Peas polisher prices china, especially after assembly. First remove the foreign matters on the Peas polisher prices china, turn the pulley by hand without abnormal sound and foreign matter feeling then can be start.

Peas polisher prices china
2. After Peas polisher prices china is idling for 5-8 minutes after startup, check whether the rotation direction and speed of motor and fan are normal before feeding. The feed volume shall be adjusted according to the quality of raw grain. (the starting feeding of new machine shall not be too large) the feeding shall be continuous and uniform.
3. The Peas polisher prices china will wear normally in use. If there is no good in the surface finish of grain after processing 100-200 tons, appropriate cloth can be added on the spindle according to the situation. If the spiral cloth is seriously worn, it shall be replaced in time.
4. During normal operation, check the motor temperature of Peas polisher prices china(70 ℃ - 80 ℃), bearing temperature (no more than 20 ℃ - 30 ℃ of room temperature) to prevent damage to the parts due to excessive temperature.
Through the above introduction and analysis of the Peas polisher prices china, hope it helps you.

Relevant News

undefined

undefined