Gravity destoner manufacturers take you to understand the working process impact analysis of the gravity stone removal machine


Time of issue:

2021-09-15

Gravity destoner manufacturers tell you that the gravity flow of the gravity stone removal machine is too large or too small, which will reduce the stone removal force. It has very little flow, and the material on the screen surface is so thin that it can be easily broken (or blasted) by the airflow. Even the mud blocks were blown away, and the air volume was unevenly distributed on the screen surface, dangerously uneven, preventing the gravity device from separating.

Gravity destoner manufacturers tell you that the gravity flow of the gravity stone removal machine is too large or too small, which will reduce the stone removal force. It has very little flow, and the material on the screen surface is so thin that it can be easily broken (or blasted) by the airflow. Even the mud blocks were blown away, and the air volume was unevenly distributed on the screen surface, dangerously uneven, preventing the gravity device from separating.

Gravity destoner from China manufacturerGravity destoner manufacturers tell you that gravity stone removal machine has large flow and thick particle layer. Gravity (especially clay) and grain are not sufficiently graded, which also reduces the rumble effect of the Gravity Master. Therefore, the understanding of gravity flow must be compatible with the additional output of the equipment and the nature of the grit in the raw grain.
Gravity destoner manufacturers tell you that it is also important to adjust the air volume of the gravity stone removal machine. Under certain other conditions, the air volume can be judged from the air volume according to the movement of the material on the screen surface and the quality of the material at the discharge port. When its air volume is too large, the material on the screen surface will be in a floating state, and even "blow through" and "return bubbles" will occur.
Gravity destoner manufacturers tell you that when it is used in the grinding plant, when the gravity stone removal machine is used in the cleaning department, the incoming material can be divided into about 5%-30% light material and 70%-95% heavy material through the equipment. The materials separated by the gravity destoner are mainly concentrated on light impurities, while the latter is mainly concentrated on impurities (stones) heavier than wheat. The material with a larger proportion passes through the upper screen surface and completes the stone separation effect on the lower screen surface.
The above information is the Gravity destoner manufacturer's introduction and analysis of the working process impact analysis of the gravity stone removal machine, hope it helps you.